When was the tippmann 98 released

This simple system prevents the front bolt from chopping the paintball if it does not find its way completely into the firing chamber when the trigger is pulled. In early , the 98 Custom product line underwent a refresh, simultaneously yielding the 98 Custom Platinum and termination of manufacture of the older 98 Custom non-A.

The powdercoat on the Custom Pro is also very scratch resistant. There is a common misconception about the Tippmann Custom Pro's electronic Trigger. The A-5 is a semi-automatic paintball marker. It utilizes a new loading concept called the "Cyclone Feed. It uses a larger surface area and a series of rotating arms to move paintballs into the firing chamber of the gun. The arms come together to make a star shape, holding a total of five balls between its arms.

The arms push the paintball completely into the firing chamber, almost eliminating the chance a paintball will be chopped by the front bolt. The stock Cyclone is rated for a maximum of 15 balls per second. While higher rates of fire are possible, the stock mechanics are not designed to deal with the stresses this will place on them. To achieve higher rates of fire there are several third party cyclone ratchets available. This limitation was addressed during the creation of the X In addition to the stock semi automatic function, the A-5 can be easily upgraded with either the Response Trigger or an electronic grip frame.

The E-Grip uses a 9-Volt battery, a microswitch, and a solenoid to trip the sear. The A-5 can often be purchased with these upgrades already installed. It is one of the most upgradeable markers on the market, with many different cosmetic and performance parts. The general paintball community sees this marker as one of the best basic utility markers of the woodsball crowd. However its lower general rate of fire, excess weight, and large profile make it an unpopular choice among serious and tourney paintball players.

While this marker is a good starter marker and can be had for a small relative investment, the price of upgrades can quickly outstrip the costs of higher end base marker with identical or superior capabilities. The C-3 with PEP technology is a paintball marker produced by Tippmann that is the first paintabll marker to run on propane. It is a hopper fed gun with a 16 ounce propane tank that has up to 50, shots per tank. The propane is safe and it does not change with temperature like CO2.

It is a pump gun with a 13 inch mandrel wrapped composite barrel for increased accuracy and reduced weight. It is made for players looking for marksmanship and strategy, and it is also made for new paintball players.

It has a standard trigger and a normal feed system. It is Currently, there are no accessories. The C-3 is a unique pump-action marker that utilizies propane combustion rather than the usual carbon dioxide or compressed air. The manufacturer claims that it is capable of approximately 50, shots per 16oz. Propane has similar properties to other propellent gases, but is much more widely available than others, at hardware stores and other shops that stock the small disposable propane tanks, designed for use with a camp stove.

This marker is especially enticing to those who live in remote areas that may not have CO 2 filling stations available. According to Tippmann, propane is not as significantly affected by temperatures as CO 2 is, and is more like nitrogen or compressed air which is mostly nitrogen in this respect.

The X-7 is the next generation A While similar in general design, the X-7 is different is a few subtle ways. While the X-7 shares the same barrel threads as the A-5, its body design has been altered so most A-5 accessories stocks, magazines, pneumatics can not be used on the X In , Tippmann Pneumatics launched a line of.

The triumph series is aimed at capturing the "other half" of the entry level market of paintballers who favor a more compact and lighter marker and who have no desire for the classic MILSIM look that Tippmann is famous for. Very few aftermarket upgrades can be purchased for any of the Triumph Series, and are said to be available in October.

The SMG 60 was one of the first fully automatic paintball markers on the market. Many players complained about its overpowered nature in game play. However, this is countered by the fact that it uses 3 stripper clips of 5 balls each for 15 total , making its capacity quite limited. The entire magazine can be emptied in about 1. It was chambered in. Also the barrel is fixed, i.

The SMG60 was also one of the first guns to standardize a constant air-source, while most of the paintball world was still relying on 12grams.

The same as the SMG60, except it was chambered in. Tippmann offered a trade-in system in which SMG68's could be converted into 68 Specials, by adding a pront bolt, and external linkage arm. This factor has greatly contributed to the SMG68's rareity.

The SL was a pump gun designed for improved durability over prior product designs. The body was constructed from a cast and machined magnesium aluminum alloy, and the hopper adapter was integrated into the body casting, reducing the overall number of parts. The pump handle was originally manufactured with a cast metal, but was later replaced with a fiber-reinforced plastic.

A squeegee could be stored in the pump handle, and a breech port could be used to quickly clean the barrel. The 68 Special was an inline poppet valve design very similar to the SMG in layout and design. It had a built in back bottle setup that ran on liquid CO2 and was very inefficient, partially because of the hammer weight nearly 1 pound. It was one of the first semi-auto markers on the market, and cycled at 6 balls per second, which was very fast considering the loader technology at the time.

Most importantly, the constant-air adapter was relocated to an ergonomic position in the base of the cast gripframe meaning that players could easily aim with a full mask on.

The Pro-Am is an open bolt semi-automatic marker. Early models had cast metal foregrips and pistol grips the Pro-Am , while later models had composite foregrips and grip frames the Pro-Lite. Sign in below for a faster checkout. Forgot your password? Cancel Sign In. Using a new technology that has the front and rear bolt working independently of each other, ACT virtually eliminates ball chopping and improves ball accuracy with less barrel cleaning. And unlike other anti chop systems, this system maintains ball velocity shot after shot and does not have to be re-cocked if the anti chop technology had to be engaged.

Semi automatic,. Join Our Newsletter. The Flatline Barrel System adds extended range to the 98c by creating a backspin on the paintball. The Cyclone Feed System , found stock on the A-5 and X-7, uses excess gas from firing to cycle a spinning agitator to feed a paintball into the chamber after each shot. The Tippmann 98 Custom is one of the most customizable markers in the world of paintball. Likewise you can customize it by adding accessories that improve accuracy, appearance, and rate of fire.

Some of the upgrades include a flatline barrel, a APEX Barrel as well will allow for multiple different types of shots Curve Left, Curve Right, Drop Shots and Flatline similar shots , a 14" barrel, 16" sniper barrel, a commando stock, Dogleg air-thu kit, Longbow stock, M SAW stock, camouflage graphics kit, Collapsible stock, Cyclone feed system, Delux parts kit, Drop Forward, E-Trigger electronic upgrade, O-ring kits, Remote line, Response trigger kit, Universal parts kit, and a Vertical expansion chamber kit.

Some other upgrades not available from the official Tippmann website are a double trigger, and scopes. The upgrades include:. The Tippmann 98 Custom Pro is an upgraded version with the same basic look as a Tippmann 98 Custom but comes with a 11 inch barrel, double finger trigger, drop forward, and A.

Paintball Explore.